Emanuele Cipolla

È una Sun Ultra 5 che ho acquistato da Paolo Gatti. Ho aggiunto una scheda di espansione USB 2.0 PCI perchè ho voluto collegare alcune periferiche, e mi è andata bene. Di seguito dmesg (sto usando anche qui Debian etch).

PROMLIB: Sun IEEE Boot Prom 'OBP 3.19.4 1999/04/28 15:05'
PROMLIB: Root node compatible:
Linux version 2.6.18-6-sparc64 (Debian 2.6.18.dfsg.1-18etch1) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Tue Feb 12 21:51:30 UTC 2008
ARCH: SUN4U
Ethernet address: 08:00:20:c0:66:02
PROM: Built device tree with 53701 bytes of memory.
On node 0 totalpages: 64402
DMA zone: 64402 pages, LIFO batch:15
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(262144):line_sz(64)]
Built 1 zonelists. Total pages: 64402
Kernel command line: root=/dev/hda2 ro
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80×25
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Memory: 510072k available (2208k kernel code, 784k data, 136k init) [fffff80000000000,000000001ff24000]
Calibrating delay using timer specific routine.. 720.54 BogoMIPS (lpj=1441090)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
checking if image is initramfs… it is
Freeing initrd memory: 4588k freed
NET: Registered protocol family 16
PCI: Probing for controllers.
/pci@1f,0/pci@1,1: SABRE PCI Bus Module
/pci@1f,0/pci@1: SABRE PCI Bus Module
PCI0(PBMA): Bus running at 33MHz
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,CS4231]
power: Control reg at 1fff1724000 … powerd running.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
AUXIO: Found device at /pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
/pci@1f,0/pci@1,1/ebus@1/eeprom@14,0: Clock regs at 000001fff1000000
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 32768 bytes)
TCP established hash table entries: 16384 (order: 4, 131072 bytes)
TCP bind hash table entries: 8192 (order: 3, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1208633003.232:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to mono PROM 80×34
rtc_init: no PC rtc found
[drm] Initialized drm 1.0.1 20051102
/pci@1f,0/pci@1,1/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 6
/pci@1f,0/pci@1,1/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 7
f0061cc8: ttyS0 at MMIO 0×1fff1400000 (irq = 5) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
f0061cc8: ttyS1 at MMIO 0×1fff1400040 (irq = 5) is a SAB82532 V3.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
rtc_sun_init: Registered Mostek RTC driver.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
input: Sun Mouse as /class/input/input0
USB Universal Host Controller Interface driver v3.0
PCI: VIA IRQ fixup for 0000:02:03.0, from 17 to 1
uhci_hcd 0000:02:03.0: UHCI Host Controller
uhci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:02:03.0: irq 17, io base 0×1fe02002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: VIA IRQ fixup for 0000:02:03.1, from 18 to 2
uhci_hcd 0000:02:03.1: UHCI Host Controller
uhci_hcd 0000:02:03.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:02:03.1: irq 18, io base 0×1fe02002020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sunhme.c:v3.00 June 23, 2006 David S. Miller (davem@davemloft.net)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:c0:66:02
eth1: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:c0:66:02
CMD646: IDE controller at PCI slot 0000:01:03.0
CMD646: chipset revision 3
CMD646: chipset revision 0×03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 14
ide0: BM-DMA at 0×1fe02c00020-0×1fe02c00027, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0×1fe02c00028-0×1fe02c0002f, BIOS settings: hdc:pio, hdd:pioProbing IDE interface ide0…
usb 1-2: new full speed USB device using uhci_hcd and address 2
SCSI subsystem initialized
usb 1-2: configuration #1 chosen from 1 choice
hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive
Initializing USB Mass Storage driver…
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ide0 at 0×1fe02c00000-0×1fe02c00007,0×1fe02c0000a on irq 14
Probing IDE interface ide1…
hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
ide1 at 0×1fe02c00010-0×1fe02c00017,0×1fe02c0001a on irq 14 (shared with ide0)
qla1280: QLA1040 found on PCI bus 3, dev 4
scsi(1:0): Resetting SCSI BUS
Vendor: WD Model: 3200JB External Rev: 0107
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
scsi1 : QLogic QLA1040 PCI to SCSI Host Adapter
Firmware version: 7.65.06, Driver version 3.26
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi disk sda
SABRE0: PCI SERR signal asserted.
SABRE0: PCI bus error, PCI_STATUS[83a0]
SABRE0: PCI SERR signal asserted.
SABRE0: PCI bus error, PCI_STATUS[83a0]
hda: max request size: 128KiB
hda: 40132503 sectors (20547 MB) w/1902KiB Cache, CHS=39813/16/63, (U)DMA
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8
hdc: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SABRE0: PCI SERR signal asserted.
SABRE0: PCI bus error, PCI_STATUS[83a0]
SABRE0: PCI SERR signal asserted.
SABRE0: PCI bus error, PCI_STATUS[83a0]
SABRE0: PCI SERR signal asserted.
SABRE0: PCI bus error, PCI_STATUS[83a0]
SABRE0: PCI SERR signal asserted.
SABRE0: PCI bus error, PCI_STATUS[83a0]
Adding 1357472k swap on /dev/hda6. Priority:-1 extents:1 across:1357472k
EXT3 FS on hda2, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth1: Link is up using internal transceiver at 100Mb/s, Full Duplex.
eth1: no IPv6 routers present